How to Quickly Fix USB Ports Not Working Well?

The industry standard for digital data communications over short distances is called USB, or Universal Serial Bus. For computers and other consumer electronics, a USB port is a common cable connection interface. Digital files can be transferred by connecting the USB drives to your computer or other electronic device via the USB connector. Furthermore, the USB port can be utilized to provide electricity to USB devices that require it via the USB connection.

 

The system typically has multiple USB ports, which are crucial interfaces for you. But when you use the computer, things do not always run well. There are numerous complaints about Windows 10/8/7 USB port issues, which can happen suddenly. So, if you are facing this issue and looking for a solution, you are at the right place. There are different ways through which you can solve the USD ports not working issue, and they are listed in this article. So let’s dive in.

How to Fix USB Ports Not Working Problem?

The USB ports on your computer are one of the most important components that allow you to customize and control your computer experience.  When a USB port is not functioning properly, try these popular methods to troubleshoot and fix it before you think about hiring any experts.

Method 1: Plug into Another USB Port

The computer typically has multiple USB ports. Therefore, removing the USB drive and then plugging it into another USB port is a smart approach to rule out a single faulty USB port. If the USB drive functions well after being plugged into a different port, there might be a physical problem with the initial USB port. You must get professional assistance to fix it if you wish to use it.

Method 2: Use a Different USB Cable

Compared to USB port failure, USB cable failure is more frequent. Therefore, you can try using a different USB cable to see if the USB port can function normally if you are using one to connect your device to the PC and you have another USB cable on hand. It will be obvious that the first is broken if the USB device begins to function.

Method 3: Examine the USB Port Carefully

The USB port is generally quite sturdy. However, when no device is connected, you observe that the port is wide open. This implies that it is very simple for dust or food particles to enter the USB slot. Therefore, you can examine the USB port closely to check for any obstructions when the problem of the port not working arises. If so, kindly turn off your computer and carefully remove the obstruction with a thin wooden or plastic tool.

 

One method is to plug the USB drive into the computer and then move the connection slowly. There should be a physical issue with either the USB port or the cable if it constantly connects and disconnects. If there is a lot of movement, the board that should be attached to it is either bent or broken. We believe you would be better off taking the machine to a professional regardless of which of the two conditions listed above occurs.

Method 4: Update Driver Software

Another way to resolve the USB port not working Windows 10/8/7 64-bit/32-bit issue is to go for the USB 3.0 driver download.

1.     To launch the Run window, press the Windows and R buttons at the same time.

2.     To launch Device Manager, type devmgmt.msc and press the OK button.

3.     After that, you can select the Update Driver Software option from the pop-out list by right-clicking on the USB controller.

4.     You will then be presented with the interface where you must select the option to "Search automatically for the updated driver software."

5.     After the process is complete, please click the Close button. Then, follow these steps again to update the driver software for every USB controller.

Method 5: Examine the USB Controllers in Device Manager.

1.     Reactivate the USB controller and check for hardware changes to get USB ports to function again.

2.     To check for hardware changes To launch the Run window, simultaneously press the Windows and R buttons.

3.     To launch Device Manager, type devmgmt.msc and press the OK button.

4.     Select the Scan for Hardware Changes option after performing a right-click on your computer's name. After that, you must wait for the scanning procedure to finish.

5.     You must remain in the Device Manager interface to re-enable the USB controller. Next, find and expand Universal Serial Bus Controllers from the list.

6.     To uninstall the USB controller, right-click on it and select Uninstall from the popup menu.

7.     To uninstall each USB controller individually, you must repeat step 2. Following that, Windows will automatically reinstall the USB controllers if you restart the computer.

USB ports are the most significant component of your computer. If it malfunctions, the situation can be really frustrating. However, by following the solutions provided in this article, you will be able to troubleshoot this problem.